How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
Type Your Appliance Question Here...
George-Allsorts is online now

Stuck with beko dcu9330w machine dead usual checks led no

This answer was rated:

Stuck with beko dcu9330w machine dead usual checks led no where checked door switch
ok along with thermo over heat etc checked control panel no sign of stress had spare panel which I had repaired 2 days prev to component level.Replaced board ran for about 4or 5 minuets same problem.Feel as I have missed some thing HELP.better explain I worked in the trade a vast number of years before retirement in charge of w/shop but I still need your help.

Best I can do without being in front of the appliance is send you the wiring diagram on this... Is that satisfactory to you? .. If so, let me have the factory code

George-Allsorts and other Appliance Specialists are ready to help you
Customer: replied 1 year ago.
Further developments checked boards under under computer microscope both same problem 4 resistors burnt up.

Have you traced where the resistors are feeding?

Customer: replied 1 year ago.
Hi George sorry for slow reply have been bulled in to putting it away now for now I will let you know how I get on

OK Cliff