How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your Appliance Question Here...
Rob is online now

Beko fridge freezer BC73F Freezer was working OK but fridge

Customer Question

Beko fridge freezer BC73F
Freezer was working OK but fridge was warmer about 9 degrees.
I replaced thermostat board.(small PCB behind temp. selector )but now the fan runs but the compressor doesn't. Put the old pcb back, still comp does not run.
Submitted: 1 year ago.
Category: Appliance
Expert:  Michael replied 1 year ago.

Hi , I am Tech Michael an expert in this field and I will be assisting you today. I am a Master Technician that's dedicated to giving you the best Answer possible.

If you are new to the site, this is briefly how it works:

1. We may need some back and forth to exchange information (if needed) and there is no extra cost for replying.

2. I will give you the best possible Answer for your problem without the ability of actually being present with you.

The better you describe the problem, the quicker I can help ;-)

3. Remember to leave a Positive Rating ,it doesn't cost anything additional to rate kindly;-)

I am only credited for my time and expertise if you rate kindly.

Please check all your wiring. Make sure you did this correctly.

If you are unsure, please send me a pic of the board with the wiring.

Also make sure you didn't pull off any wires from anyplace else by accident.

And check that the compressor is still connected at the back;-)


Tech Michael