How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JamesI Your Own Question
JamesI, Handyman
Category: Appliance
Satisfied Customers: 2159
Experience:  I have repaired and maintained numerous items over the years, from fridges to freezers, radios to TV's.
Type Your Appliance Question Here...
JamesI is online now

Kenwood KID60S15 dishwasher is stuck on end programme

This answer was rated:

Kenwood KID60S15 dishwasher is stuck on end programme
Customer: replied 7 months ago.
Light is constantly on end

Hi Karen, are any other lights showing or flashing?

Customer: replied 7 months ago.
No just the end light is on
Customer: replied 7 months ago.
Going back into work now!
Could you message me a solution please

Hi Karen,

So when you open the door and press and hold the programme button for 5 seconds the end light stays on and wont let you select a program?

Customer: replied 7 months ago.
that's right

This suggests the main board has failed, as your not getting any lights illuminated to suggest an error code.

With this type of fault a new PCB can cost upwards of £80, so I would suggest going for a repair and protect plan with D&G, details can be found here.

If you would prefer to do the work yourself you can strip down the door (where the PCB is located) and order the replacement part here.

Please let me know if I can be of any further assistance.

Customer: replied 7 months ago.
Ok thanks for your help

So I can close the case please rate the service using the star rating on this page.

JamesI and other Appliance Specialists are ready to help you