How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask carlday1 Your Own Question
carlday1
carlday1, Home Appliance Technician
Category: Appliance
Satisfied Customers: 381
Experience:  I have 5 years experience in repairing and maintaining small domestic appliances.
69505510
Type Your Appliance Question Here...
carlday1 is online now

Hover Vision Tech Model VT 1014D23/1-80 N 3100540413360090

This answer was rated:

Hover Vision Tech
Model VT 1014D23/1-80
N 3100540413360090This machine was bought some 5 years ago.
The Clock / Timer reads too long
9 minutes = 20 minutes
50 minutes = 120 minutes IE 2 hours
This has been the case since we bought the machine.
Can we have fitted a proper timer dial.

Hi,

​My name is ***** ***** I will help with your question. I suspect the problem is caused by the programmer module the part is available but is normally over £100 unprogrammed and would need programming to the machine. The cost of programming and fitting could cost up to £80.

Is the machine working ok except the time is wrong?

carlday1 and other Appliance Specialists are ready to help you
Customer: replied 4 months ago.
the machine is perfect otherwise
O'K If you can do this tell us when you can do it.
Yours Stephen B. T. Gately

H​I Stephen,

​I am sorry but I cannot arrange for the part to be fitted I can just offer advise over Just Answer. I can suggest local engineers who may be able to help but you would need to contact the directly.

Customer: replied 4 months ago.
O'K Karl, thank you.
Can you tell me their contact numbers
Yours Stephen Gately