How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 18124
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Fagor washing machine. Code F07 flashing. Filter has been

This answer was rated:

Fagor washing machine. Code F07 flashing. Filter has been cleaned
Assistant: What's the make and model of your washing machine? And can you guesstimate how old it is?
Customer: Fagor, approx 5 years
Assistant: Do you plan on doing the work yourself?
Customer: If It's easy
Assistant: Anything else we should know to help you best?
Customer: I don't think so


F07 error code is an overfill fault. The below is from the service manual.

Overfill or drain pump not in circuit

  • Check for overfoaming evidence - can trip pressure switch
  • Check wiring to level sensor
  • Check pressure switch is not defective
  • Water inlet valve locked open
  • Check drain pump for continuity

So basically you need to check the pressure switch and the hose going to the bottom of the switch. Remove the top and you should locate it from there on the top.

Remove the hose on the bottom of the switch and inspect it as it can sometimes rub on the drum or cabinet and puts a hole in there which causes it to overfill with water.

If thats ok then you need to test the drain pump with a multi meter for resistance as this can also cause the fault.

So check the above if you can and see how it goes from there as the F07 error code is as above.


Daniel and other Appliance Specialists are ready to help you