How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17766
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

KenwoodDDW60W15 dish washer When switched to programmeE4

Customer Question

KenwoodDDW60W15 dish washer
When switched to programmeE4 appears in red
Submitted: 4 months ago.
Category: Appliance
Expert:  Daniel replied 4 months ago.

Hi

E4 indicates the anti flood device in the base has been activated.

Look below the door.

If you have an access panel, unplug the appliance and take the panel off.

Remove the water in the base and try the machine again.

If no panel.

Empty the machine.

Unplug it.

Take it out.

Put a towel across the bottom rear.

Tilt the machine rearward about 45 degrees and drain the water out of the base.

Try the machine again.

If all is well, it will work again.

If it starts working and stops with E4 again, you have a leak.

Take the side panels off.

Drain the base again.

Watch it working.

You need to locate and cure the leak to rectify the fault.