How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Erdal Zal Your Own Question
Erdal Zal
Erdal Zal,
Category: Appliance
Satisfied Customers: 2481
Type Your Appliance Question Here...
Erdal Zal is online now

I have a cda wc340in dishwasher with a issue It takes longer

This answer was rated:

I have a cda wc340in dishwasher with a issue
It takes longer to press and select a prog cycle
When you eventually get to select one and shut the door instead of the usual 4/5 sec delay before starting up it starts immediately and then after about 15/20 secs it bombs out with lights 1/4 & 5 flashing and bleeping . Had several good years out of this machine . Is it time to call it a day
Regards John

Hello and welcome to JustAnswer. I would like to try to help you. I am an expert from Germany and work with language translators. I hope you will understand me. phone service is provided automatically by the system. Please just ignore it.

It sounds like the controller is not going to work for much longer. It could be that it will last for another month or a year. I recommend to use the device like this for now. Please try this. Unplug it from the wall socket so that the power goes out. Then press the city button for at least 30 seconds. Wait 30 minutes. Then send the plug for the power. And then test it again.

Do you have any questions? I am waiting for your message. Greeting Erdal Zal

Customer: replied 6 months ago.
Is the city button the power button ?

I'm sorry my program for language translation sometimes does not work properly. Of course I mean the power button.

Do you have any questions? Can I still help you?

Customer: replied 6 months ago.
Just tell me what the city button or are you trying to get more money out of me

I just wrote them. I mean the start button or program button.

I didn't ask you for money.

Customer: replied 6 months ago.
I cannot see how holding the power button on for 30 secs with no power to it and waiting 30 MINS is going to do anything

This causes the controller to be discharged and a reset to be performed.

Customer: replied 6 months ago.
Ok understand now

Do you have any more questions?

Customer: replied 6 months ago.
If it works will it work for a while or just for a cycle

No normal if nothing is defective it should then work well again forever.

do you have any more questions?

Customer: replied 6 months ago.
No Thankyou here’s hoping it works Thankyou

Ok I wish you good luck and a nice evening.

Erdal Zal and 3 other Appliance Specialists are ready to help you