How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Erdal Zal Your Own Question
Erdal Zal
Erdal Zal,
Category: Appliance
Satisfied Customers: 2643
Type Your Appliance Question Here...
Erdal Zal is online now

Zanussi Washer Dryer ZWT 71201 WA Display seems to work as

Customer Question

Zanussi Washer Dryer ZWT 71201 WA
Display seems to work as normal but when press start button ERR shows on the display
Am sure it normally flashes for a few seconds but then stays a solid green colour but it’s not now, stays flashing
There is also a little light next to the word ‘door’ which also normally lights up but no light
Is there any way of resetting the machine?
Believe it thinks the door is not closed.
Tried everything you suggested previously.
Thank you very much.
Submitted: 7 months ago.
Category: Appliance
Expert:  Erdal Zal replied 7 months ago.

O. k. then unfortunately the door lock the electrical mechanism is defective. It must be measured electrically once with a multimeter and replaced if necessary.