How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask KevinWhiteJA Your Own Question
KevinWhiteJA
KevinWhiteJA, Home Appliance Technician
Category: Appliance
Satisfied Customers: 2944
Experience:  18+ years experience as Appliance Tech.
70193065
Type Your Appliance Question Here...
KevinWhiteJA is online now

I have an AEG dishwasher, it is only about 4 months old an

This answer was rated:

i have an AEG dishwasher
JA: Do you know the model of your AEG dishwasher? How old is it?
Customer: it is only about 4 months old an FSB42607Z
JA: How long has this been going on with your AEG dishwasher? What have you tried so far?
Customer: The 3 my time lights are flashing 3 times intermittently but there is no kink in the water feed and good water pressure
JA: Anything else we should know to help you best?
Customer: the machine sounds as normal but not filling with water and the on/off button does not seem to be working

Hi,

Welcome to Justanswer … my name is ***** ***** I will help you today!

Have you seen any error codes/flashing lights?

Please DO NOT ACCEPT the PHONE CALL request.

That is auto generated and not sent by me.

Customer: replied 5 days ago.
the 3 my time lights are flashing 3 times intermittently. I have checked the water suppl and there are no kinks in the pipe and water pressure is good
Customer: replied 5 days ago.
are you there?

Yes still here, give me few minutes to check schematics of your appliance.

Try this and let me know how it goes:

You will have to unplug the appliance and pull it out.

Then tip it backwards by around 45 degrees so excess water drains off completely.

After this is done, check the drain hose where it connects to house drain and make sure it is not clogged.

Then clean the mesh filter from inside and make sure it is not blocked.

Reconnect everything and plug it back.

Customer: replied 5 days ago.
Hi Nothing appeared to be blocked but it is actually working now. Thank You

Glad it is sorted :)

You are very welcome.

Please click on STARS (*****) from top of this page so, we can close this.

KevinWhiteJA and 2 other Appliance Specialists are ready to help you