How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Darran Wilkins Your Own Question
Darran Wilkins
Darran Wilkins ,
Category: Appliance
Satisfied Customers: 504
Experience:  dasdasd
108849247
Type Your Appliance Question Here...
Darran Wilkins is online now

Oven door does not close and springs back, it’s gas and over

Customer Question

Oven door does not close and springs back
JA: Is your oven gas or electric? How old is it?
Customer: it’s gas and over 12 years old
JA: How long has this been going on with your oven? What have you tried so far?
Customer: its around 5 days, taken door off tried adjusting door receiver and it’s still not closing
JA: Anything else we should know to help you best?
Customer: not that I’m aware of
Submitted: 1 year ago.
Category: Appliance
Expert:  Darran Wilkins replied 1 year ago.

Guys I'm darran I'm a domestic engineer

Door hinges need replaced you can get them and do it your self it is not a hard job just unscrew the grub screws holding the hinges replace and re sit it in the chassis

Espares.com uk white goods and many others supply next day delivery

But before you go for hinges as these no model etc Is there a door latch make sure it's not bouncing and returning but door hinges guys

Take care regards

Darran

Customer: replied 1 year ago.
Thanks for this, there is no model no. on the oven, I have an idea but can I send you a pic of it
Expert:  Darran Wilkins replied 1 year ago.

Definitely the spring mechanism

Guys that looks like a generic zanussi style oven if you take it out the alcove there should be a sticker on the back

You could chance it but to make sure you get the correct part you do need serial , model or Pnc number

But no doubt a 20 min job and the ovens good as new

Regards darran

Customer: replied 1 year ago.
Which part is the alcove?
Expert:  Darran Wilkins replied 1 year ago.

The housing that the oven sits in, the cabinet you shoukd be able to just remove the oven it may have a couple of small screws and sit the oven on the floor , remember to remover from power then you can read the rating plate at the rear

Darran

Customer: replied 1 year ago.
Hi Darran, I have taken the spring out and it’s a Nuova star spring. I have attached a pic
Customer: replied 1 year ago.
Will this help me order the part?
Expert:  Darran Wilkins replied 1 year ago.

Hi guys if you send it to espares.com they might be able but I think best bet is an engineer to remove the appliance and look at the rating plate you will or should at least get the make and model

Regards darran

Expert:  Darran Wilkins replied 1 year ago.

Also espares.com etc might actually do the generic part for that spring