How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 21632
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Morning we have a fan assisted AEG Electrolux oven and when

Customer Question

Morning we have a fan assisted AEG Electrolux oven and when I put it on aftrer 10 or so minutes it's turns itself off as if there was a power cut. Could this be a faulty regulator
JA: What Electrolux product do you have?
Customer: An Electrolux competence B2100-4 AEG fan assisted
JA: What have you tried so far with your Electrolux product?
Customer: Just resetting the clock and it works for around 5-10 mins then cuts out and won't restart for around 5 mins
JA: Anything else you want the Electronics Expert to know before I connect you?
Customer: not really thank you.
Submitted: 1 year ago.
Category: Appliance
Expert:  Daniel replied 1 year ago.


The fault you have is a fault on the thermal cut out. Ive replaced loads of these over the years fo this fault. As the thermal cut out fails so the cooling fan doesnt run so it overheats on the controls and cuts out like this. Once its cooled down then it will come on after 20 minutes so as its doing.

You need to remove the oven out from the unit and turn the power off.

Then remove the top and the thermal cut out is cable tied into the wiring loom at the front.

It will have 2 white wires and 2 blue wires going into it.

Click here for the part to see what it looks like

You need to replace this as you can also order it from the link above and that will cure the fault from there for you,