How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask KevinWhiteJA Your Own Question
KevinWhiteJA
KevinWhiteJA, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3509
Experience:  18+ years experience as Appliance Tech.
70193065
Type Your Appliance Question Here...
KevinWhiteJA is online now

I have an issue with water draining on my electrolux

This answer was rated:

hi, i have an issue with water draining on my electrolux esl6211lo
JA: How old is your Electrolux appliance?
Customer: its nearly new, its my mothers but we can not find any paperwork for it as she inherited it in an exisiting kitchen
JA: How long has this been going on with your Electrolux appliance? What have you tried so far?
Customer: nothing, it was on a cycle but getting continious 2 beeps and flashing end light. the bottom of washer still has water in it. ive turned it off and tried running a cyle but it just beeps aagin
JA: Anything else we should know to help you best?
Customer: dont think so

Hi,

Welcome to Justanswer … my name is ***** ***** I will help you today!

2 beeps in your dishwasher is drain fault.

The dishwasher is unable to drain as it is clogged.

Try this:

You will have to unplug the appliance and pull it out.

Then tip it backwards by around 45 degrees so excess water drains off completely.

After this is done, check the drain hose where it connects to house drain and make sure it is not clogged.

Then clean the mesh filter from inside and make sure it is not blocked.

Reconnect everything and plug it back.

Select any program and it should work, let me know how it goes.

Please DO NOT ACCEPT the PHONE CALL request.

That is auto generated and not sent by me.

If you have any further questions, please do not hesitate to ask!

____________________________________________________________

If you are satisfied with my assistance, your 5 STAR Rating (from top of this page) at this time is appreciated. Thank You!

Customer: replied 1 month ago.
hi, ive just done all. tilted but nothing draining away

Have you checked the drain hose and pump ?

Customer: replied 1 month ago.
ive checked the drain hose no kinks etc, is the pump the filter in side?

Yes, clean it as much as you can.

Then reconnect and see if you still get same error code.

If the problem is still there then you will have to contact Electrolux as it is still under warranty (if it is).

The problem will be with pressure sensor that is either clogged or faulty and will have to be replaced.

KevinWhiteJA and other Appliance Specialists are ready to help you