How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Darran Wilkins Your Own Question
Darran Wilkins
Darran Wilkins ,
Category: Appliance
Satisfied Customers: 268
Experience:  dasdasd
108849247
Type Your Appliance Question Here...
Darran Wilkins is online now

We have a new AEG oven, delivered today and installed by a

This answer was rated:

We have a new AEG oven, delivered today and installed by a professional electrician. When you turn the overn on the fan rattles loudly for the first few seconds. When you turn it off, same.
JA: Is your AEG oven gas or electric?
Customer: electric AEG BES355010M Built In Electric Single Oven with added Steam Function - Stainless Steel - A Rated
JA: How long has this been going on with your AEG oven? What have you tried so far?
Customer: it was installed an hour ago! We turned it on and that's what happened
JA: Anything else we should know to help you best?
Customer: Just that it's brand new and never been used
Hiya guys
I'm darran I'm a domestic engineer and refrigeration engineerand microwave engineer
Is your oven a double oven by any chance
Customer: replied 11 days ago.
Hi... It's single
Or the fitted type that sits In the chassis
Hi there :) does the noise start after a few seconds like 30 to 40 after putting the iven on
Regards darran
Customer: replied 11 days ago.
No, it's instant.. it's like it's catching on something.
Guys it sounds like when the applince has been installed
The top cover has been pressed down by accident or not knowing
On the top of the applince Is a cooling fan if there has been any pressure on the top it can cause the fan the scrape as it is hitting the top plate a simple uninstalled and push the top plate up solves this
If it is still I curing after either the applince is installed not square
Or there is an issue with the fan and possibly the back fan iven cover
Ps sorry shoukd have noticed you had said singleRegards darran
Customer: replied 11 days ago.
Thanks very much - will be calling AEG tomorrow.
Host for aeg electrolux and zanussi new installs I have been to a many were I unplug remove the appliance and the thin top literally pull it up and the fan stops hitting it but be careful the sides and walls are sharp
Guys I'm an ex aeg engineer very common in new builds
I'd touch need any further information just msg :)
Have a fine evening
Darran Wilkins and 2 other Appliance Specialists are ready to help you