How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Darran Wilkins Your Own Question
Darran Wilkins
Darran Wilkins ,
Category: Appliance
Satisfied Customers: 308
Experience:  dasdasd
Type Your Appliance Question Here...
Darran Wilkins is online now

We have a Zanussi Dishwasher, model ZDT26010FA which has

This answer was rated:

We have a Zanussi Dishwasher, model ZDT26010FA which has been built into a kitchen unit and door attaced to front. The handle has come unscrewed and I need to know how r
JA: Are there any error codes or blinking lights on your Zanussi dishwasher? How old is it?
Customer: To refix handle, is it easy to take whole dokr out of unit and unscrew from wooden cupboard front and then refix.
JA: How long has this been going on with your Zanussi dishwasher? What have you tried so far?
Customer: Happened yesterday
JA: Anything else we should know to help you best?
Customer: No
Your appliance Im Sure is a sliding type door. At the bottom we're the hinges are. Is aa small cap either side remove it and the grub screws are visible if you slightly move the door remove these screws and the door will slide off for you to fix the handle
Some fitters just screw the door right onto the chassis if this is the case you will have 4 of the door screws going right through and I to the wood door.
Have a look at the video. It will help.
Regards darran
Darran Wilkins and 3 other Appliance Specialists are ready to help you
Customer: replied 18 days ago.
Thanks Darren, was four screw job, handle refixed and everything put back together

Excellent guys take care