Appliance Repair Questions? Ask a Technician for Answers ASAP
My name is ***** ***** I will assist you with your appliance today.
I am sorry to hear you are having trouble with your appliance.
I understand how frustrating that can be.
Please check this VIDEO to get an idea on how to set it beep towards the end of wash.
Yes, I know that is not your appliance however, instructions are almost same.
OK, I will write down the instructions for you.
Please try this:
Leave it unplugged for around 10 minutes.
Then plug it back and turn it on then turn it back off.
Now press and hold the START button, keep it held in and close the door.
Now when start button starts to flash, let go off it and you will see P13 in the display.
When you see P13 Touch the > or < sensor to select 01 which means Keypad tone ON.
Then turn the program select to power to save settings.
Please let me know how it goes.
OK, I hope this helps, please do not hesitate to ask any follow up questions.
I hope you enjoyed your experience with justanswer.co.uk today.
Have a wonderful day.
OK turn it back on and try again.
OK, that is how it is done I am afraid.
The dial has to be set up on any wash program and the door should be open before you start the previous method.
Please CLICK HERE to download its USER MANUAL.
You may follow the instructions from page#72 onwards.
And yes I am here and trying to assist you.
Please understand this is not a live chat service however, I will try to respond as soon as I can.
Well, please check the instructions starting page#71 and follow them to set up the tone in your appliance.
The manual that I have attached is for your model and not for other models.
This is model specific information hence, I believe you are not following the instructions correctly.
Alternatively, you may contact Miele however, they will provide same instructions.
If there is anything else I can help you with, please let me know.
The manual that I have sent and the instructions are model specific and not generic.
I know the model number and that is how it is done on this model.
For payments etc. please contact customer support as I can only provide technical assistance and do not deal in payments.
After you get P13 you have to touch > or < sensor to select 01.