How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Tim JA Your Own Question
Tim JA
Tim JA, Customer Service
Category: Appliance
Satisfied Customers: 2429
Experience:  Owner at Self-employed
106972271
Type Your Appliance Question Here...
Tim JA is online now

I m a gas safe engineer and was wondering what is the

Customer Question

Hi
JA: Hello. How can I help?
Customer: I m a gas safe engineer and was wondering what is the overall size of a vertical flue terminal and if you can reduce the size
JA: What's the brand and model of your appliance? How old is it?
Customer: Baxi either 400 or 600 heat only
JA: What have you tried so far with your Baxi appliance?
Customer: nothing measure up for a new install
JA: Anything else we should know to help you best?
Customer: maximum flue length with 2 90 degree bends
Submitted: 13 days ago.
Category: Appliance
Expert:  Tim JA replied 13 days ago.

Good morning, and welcome to the Technical section in JustAnswer, an independent paid question and answer platform that matches customers' questions to experts in various skills. My name is ***** ***** I'll be happy to help you today.

Are you asking about the diameter of the flue, or the length?
_____

There's no time pressure on this topic - it will stay open to you for many days, and you can reply at any time. I will be away from my desk sometimes, but will respond as soon as I can.

Customer: replied 13 days ago.
Length
Expert:  Tim JA replied 13 days ago.

OK. What's the G.C. number of the boiler that you're installing?

Customer: replied 13 days ago.
its either a Baxi 600 or 400 heat only
Expert:  Tim JA replied 13 days ago.

Is this a hypothetical question, or are you actually installing a boiler?

Expert:  Tim JA replied 13 days ago.

To clarify, are you asking about the length of the flue, from boiler to terminal, or the length of the terminal itself - the part on the outside wall?

If the former, you can just measure it during your survey. If the latter, then the terminal comes with the flue kit and you can just measure that.