How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve, BMW Expert
Category: BMW
Satisfied Customers: 25242
Experience:  BMW Expert
Type Your BMW Question Here...
Steve is online now

I am replacing the DPF on my 2008 335d right hand drive. I

Customer Question

I am replacing the DPF on my 2008 335d right hand drive. I have unbolted all fixings and sensors but there is not enough room to physically remove it underneath the vehicle. I have undone the steering rack so it's loose. I have lowered the sub frame on the drivers side to give a bit more clearance from the engine mount, but there is still not enough room. Do you have to remove the engine mount to remove the DPF and if so, how can you access the Torx bolts on the mount where it's attached to the block?
Submitted: 2 years ago.
Category: BMW
Expert:  Steve replied 2 years ago.
what is the last 7 digits of the vin?
Customer: replied 2 years ago.
I've already removed it now buddy. Thanks for your reply.
Expert:  Steve replied 2 years ago.
Ok great