How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt, Mechanical Engineer
Category: Car
Satisfied Customers: 22900
Experience:  BEng hons Mech engineering, in auto industry 22 years
Type Your Car Question Here...
Matt is online now

thermostat removel on rover 825 v6 1999

This answer was rated:

thermostat removel on rover 825 v6 1999

the thermostat is buried under the inlet manifold on this engine and its very likley that parts will break and be corroded in place when you come to replace it

so I'd strongly suggest buying the complete kit of 3 parts as its very likely you'll need all 3 parts

so the inlet manifold has to come off 1st ( both the top and bottom parts and then you can access the thermostat housing and the valley pipes
Matt and other Car Specialists are ready to help you