How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sean Your Own Question
sean, Technician
Category: Car
Satisfied Customers: 3105
Experience:  UK based Ford Master Technician. Technician since 1984.
Type Your Car Question Here...
sean is online now

How do I reset the device indicator on a ford ranger 2.2 diesel

This answer was rated:

How do I reset the device indicator on a ford ranger 2.2 diesel 2012 reg?

Hello, I hope I can assist you.

Can you clarify what you mean by the device indicator? Do you mean the service due indicator?

Let me know and I'll reply as soon as I'm able to.

Thank you.

Customer: replied 3 years ago.
Yes sorry the service indicator please.


Hello again,

to reset the service light is as follows.

Ignition off, press and hold the brake and accelerator pedals (make sure the accelerator is fully down) turn the ignition on (don't start) keep the pedals pressed, after around 25 seconds the service indicator should flash, turn the ignition off and release the pedals. Turn the ignition on and the light should go off as normal, reset complete.

Let me know if I can assist further.

Best wishes,


sean and other Car Specialists are ready to help you