How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them.
Ask Ross Your Own Question
Ross
Ross, Diagnostic and repair technician
Category: Car
Satisfied Customers: 473
Experience:  Licensed diagnostic and repair technician
70583916
Type Your Car Question Here...
Ross is online now

I Have 2013 Skoda octavia and getting code p2463 soot

Customer Question

I Have 2013 Skoda octavia and getting code p2463 soot accumulation. I have take off the DPF got it professionally cleaned and now speed on vehicle is good but i still get same error code and flashing coil light. I cant do Manuel or forced regen as it keeps failing i think due to this error code
Submitted: 10 months ago.
Category: Car
Wolfgang
Expert:  Wolfgang replied 10 months ago.
Hello I’m WolfgangWhat scan tool u are using? Make and model please?
Thanks
Ask Your Own Car Question
Customer: replied 10 months ago.
It’s snap on solus ultra
Expert:  Wolfgang replied 10 months ago.

ok good what is the measure value bock on 241 please

expert mode

01 engine electronics

08 read measure blocks

then 241 an d give me the values

thanks

Ask Your Own Car Question
Customer: replied 10 months ago.
I will check tomorrow when i'm with the car and let you know
Expert:  Wolfgang replied 10 months ago.

ok

Ask Your Own Car Question
Customer: replied 10 months ago.
theres no 08 read measure blocks in the snap on
Expert:  Wolfgang replied 10 months ago.
You need to be in expert mode with the snap on
Ask Your Own Car Question
Customer: replied 10 months ago.
All I’m seeing is 01: engine management master and when I go into that I have attached the print shot and no number 8
image.jpgimage.jpg
Customer: replied 10 months ago.
This is only code I getting again and again
image.jpgimage.jpg
Expert:  Wolfgang replied 10 months ago.

ok in basic settings lets try 241 and see if it gives you the values

Ask Your Own Car Question