How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Josh Your Own Question
Josh, Computer Enthusiast
Category: Computer
Satisfied Customers: 21671
Experience:  Expert for over 10 years
Type Your Computer Question Here...
Josh is online now

Manually tune youview remote to control tv

This answer was rated:

Manually tune youview remote to control tv
Hi! My name is XXXXX XXXXX I will be assisting you. Let's get started!

You can programme your Humax remote control to operate a number of functions on your TV. You will need a code specific to match the make and model or your television in order to programme your remote control. Find your code from the Humax Website , Select Help, then RCU Code list and follow the instructions below:

  1. Select the TV button on your YouView remote control. The button will blink once

  2. Keep pressing the TV button for 3 seconds until the button lights on.

  3. Enter the 3-digit code that matches the make and model of your television. Every time a number is XXXXX the button will blink. When the third digit is entered, the button will blink twice

  4. If the correct 3-digit code is entered, your TV will power off.

  5. Press the OK button on your YouView remote control and the TV button will blink three times. The setup is complete.

  6. If the product does not power off, repeat the instruction from 3 to 5.


  • When no code is entered for one minute the universal setting mode will switch to normal mode.

  • Try several setting codes and select the code that has the most functions.

Josh and 3 other Computer Specialists are ready to help you