How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rusty Your Own Question
Rusty, Customer Service
Category: Consumer Electronics
Satisfied Customers: 6059
Experience:  Over 20 years electronics experience. How may I help you today?
Type Your Consumer Electronics Question Here...
Rusty is online now

Thank you answer. is it possible to connect

This answer was rated:

hello, thank you for your answer. is it possible to connect the dbx-snr-1 noise reduction unit between my cd-player and the unbalanced cd-input of the yamaha cx-a5100 ?kind regards,frans callebaut
Hi, welcome back. Yes you can, connect the RCA cables like you would normally. If you hear a buzz, it's because the chassis on your DBX isn't grounded properly. This is what introduces buzzing in many setups. I use balanced with unbalanced, but it's all in a grounded rack. If you hear buzzing, connect a thin wire from one of the screws on your DBX housing to a screw on your Yamaha housing. This will ground both units, and should eliminate the buzz.
Rusty and 4 other Consumer Electronics Specialists are ready to help you