How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Carl L Your Own Question
Carl L
Carl L, Technician
Category: Electronics
Satisfied Customers: 4058
Experience:  13+ Years of Computer and Electronics Experience. Current Company Owner as an IT Specialist in FL.
Type Your Electronics Question Here...
Carl L is online now

my samsung tv will not switch on and the stand by light clicks

Customer Question

my samsung tv will not switch on and the stand by light clicks and flashes. I have read the manual which says it could be a cumputer connection but I do not have a cumoputer. I do have a Wii console though.
Submitted: 4 years ago.
Category: Electronics
Expert:  Carl L replied 4 years ago.

Hi, and welcome to Just Answer. My name is Carl and my #1 goal today is to provide you with Excellent Service .

Brief Intro
**When asked to Rate on my Service, and you're ready to Rate, please only select 'Excellent Service'.
**There is no extra charge to your account when selecting 'Excellent Service' once during our conversation.
**Please know that your deposit is used to compensate me for my time in helping you just like any other consulting company and not whether or not the issue is

repairable even though I will do my absolute best to reach a solution if one exist.

Let's get started


What is the Make and Model Number of your TV?

Customer: replied 4 years ago.

Sorry for delay!


Make and Model Number:-



Expert:  Carl L replied 4 years ago.

No problem.


How long have you owned your LCD TV?

Also, are you looking to repair this yourself by removing the back panel, performing voltage measurements, replace any required boards, etc?

Customer: replied 4 years ago.

owned for 3 years


I cannot repair it myself but may be able tp get a friende who has the skills required



Expert:  Carl L replied 4 years ago.
Ok, I just wanted to make sure that we weren't jumping into a TV that was still under warranty. If you have a friend that can help, that would be great! What I'll need first is a picture of the boards with the back panel removed so I can perform a visual. From what you have already told me, I can almost guarantee you that it's a bad Power Supply Board but I just want to make sure before paying for a new one. Next, we'll need to measure the DC Voltages that the Power Suppy is putting out. We should have a 3.3, 5, 12, and possibly a 24V. Most likely you wont get it indicating a bad Power Supply. At that point, I will need the Part # off the board so I can locate a replacement.
Customer: replied 4 years ago.

will send tommorrow

Expert:  Carl L replied 4 years ago.

Ok, talk with you then.


Best Regards,

Carl Lindsey