How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Engineer
Category: Electronics
Satisfied Customers: 43460
Experience:  Electronics Engineer
Type Your Electronics Question Here...
Richard is online now

KX-TCD515E (2 phones) Aerial symbol flashing - no line connection

Customer Question

KX-TCD515E (2 phones) Aerial symbol flashing - no line connection although line OK with standard phone. Base adapter OK & charging. Handset will not re-register to base1 but "Please Wait...." Setting base main option results in only 5 bleeps and no connection. Seems radio connection electronics/chip to handsets from base has failed
Submitted: 2 years ago.
Category: Electronics
Customer: replied 2 years ago.
Digital Phones are Panasonic. Base permanently connected through ADSL filter - Have tried with and without and also connected standard phone to confirm line and line with filter both outgoing and incoming.
Expert:  Richard replied 2 years ago.
Hi there and welcome
The problem with it re-registering to the base is the issue here.
First, leave them off power for 10 minutes to remove all residue power from the base, then try to register the phones.
Do they then register?