How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask fordspec Your Own Question
fordspec, Ford Technician
Category: Ford
Satisfied Customers: 327
Experience:  ford technician
Type Your Ford Question Here...
fordspec is online now

i own a 2008 ford mondeo 2.0 petrol zetec, recently fitted

Customer Question

i own a 2008 ford mondeo 2.0 petrol zetec, recently fitted 18inch ford y design alloys, would like to lower the car using ford lowering springs, but how much would these lower the car by. thanks dean
Submitted: 5 years ago.
Category: Ford
Expert:  fordspec replied 5 years ago.

Hi there welcome and thank you for the question hope i can be of some assistance to your problem


Ford do offer lower springs on the mondeo in there accessories brochure but it only list spring for mondoes from the 09/2010 onwards and it lowers it by 30mm but your vehicle is built earlier than this so these may not fit so you would have to have your ford dealer check the part numbers of the original ford springs on your vehicle against a 2011 model if they are the same then the springs will fit. below is the link to the brochure just down load it.


Ford do also do accessories from ms design like body kits and wheels etc the ford sport transit has a ms design kit on it, now these are not listed on fords web site but most dealers have brochures of what they do and most of the lowering springs from them are either a 30 or 35mm drop so you may be best going into your local dealer and speaking to them, you can also get lowering springs from most motoring shops.


Kind Regards