How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt, Mechanical Engineer
Category: Ford
Satisfied Customers: 224
Experience:  BEng hons Mech engineering, in auto industry 22 years
Type Your Ford Question Here...
Matt is online now

2007 Ford Fiesta ST will not start. Showing water temperature

Customer Question

2007 Ford Fiesta ST will not start. Showing water temperature too high message when engine cold and engine system failure. Have replaced ECT sensor and replaced matched instrument cluster and key but problem still there.
Fault codes showing ABS U2523 Gen module with u0146-20 ic u0100-20 u2510-20 pcm p1000-63
Prior to it stopping it would cut out but before vehicle had come to rest would start again
Submitted: 2 years ago.
Category: Ford
Expert:  Mike replied 2 years ago.
Hello and Welcome -
My name is***** happy to help / advise.
First - can I ask how did you get the codes you have there - ?
What equipment was used?
Too - when trying to start - exactly what does it do - how does it sound?
Rgds, MIKE.....................
Customer: replied 2 years ago.

Hi Mike

Thanks for coming back .

The codes were got using using IDS

When trying to start nothing happens other than the warning messages come up and the immobaliser light flashes once then six times.