How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Mechanical Engineer
Category: Ford
Satisfied Customers: 229
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your Ford Question Here...
Matt is online now

I have a 58 Ford Focus 1.8 z-tech It has a fault code of

Customer Question

Hi
I have a 58 Ford Focus 1.8 z-tech
It has a fault code of p2110
I have changed all the coil packs
Throttle body
And acceleration peddle
And still have fault code and goes into safe mode saying engine malfunction
Can you help please
Submitted: 5 months ago.
Category: Ford
Customer: replied 5 months ago.
When will I get an answer
Expert:  Nicola-mod replied 5 months ago.
Hello,
I've been working hard to find a Professional to assist you with your question, but sometimes finding the right Professional can take a little longer than expected.
I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you.
Thank you!
Nicola
Customer: replied 5 months ago.
I will wait thanks
Expert:  Nicola-mod replied 5 months ago.
Hello,
We will continue to look for a Professional to assist you.
Thank you for your patience,
Nicola
Customer: replied 5 months ago.
Ok
Expert:  sebastian manrique replied 5 months ago.

Hello, I am Jose Sebastian. Your mechanic automotive expert, It's a pleasure to me to attend your question. Thank you very much for trust in just answer.

Dear customer, a pleasure to serve you. Could you tell me if you have done the following steps:
1) cleaning or replacing the EGR valve
2) MAF sensor replacement
3) Review of the wiring branches and wiring
4) Review and replacement of the connectors
5) Have you tried with another ECU just to test?

Also dear customer, it would be very helpful if you could give me information about the scanner used to know if it has the right software for your focus. Thanks Sebastian.

Expert:  sebastian manrique replied 5 months ago.

Hello, I am Jose Sebastian. Your mechanic automotive expert, It's a pleasure to me to attend your question. Thank you very much for trust in just answer.

Dear customer, a pleasure to serve you. Could you tell me if you have done the following steps:
1) cleaning or replacing the EGR valve
2) MAF sensor replacement
3) Review of the wiring branches and wiring
4) Review and replacement of the connectors
5) Have you tried with another ECU just to test?

Also dear customer, it would be very helpful if you could give me information about the scanner used to know if it has the right software for your focus. Thanks Sebastian.