My Terex TA6s had err engine on dash, terex TA6s serial

Hi Les here,
When the battery was removed was the unit still operational, was any attempt to boost start made,this can sometimes create a no go issue.
When you say will not start does the engine turn over.
I assume this unit has a tier 3 Perkins common rail engine.
We need to address a couple of small issues first, does the engine controller have power , a possible fuse issue?.
Also is the cranking speed correct, a common rail engine can be very temperamental in this regard as the engine controller is programmed only to initiate start up when certain parameters are met.
Such as cranking speed, fuel pressure in the common rail,operational crank and cam sensors.
But lets start with the basics, lets check all fuses and crank speed.
Could you send a picture of the engine and engine plate so i can narrow down the electrical diagram.
Regards les

Hi Les here,
Do you have the pictures I requested.
Regards
Les

Hi les here,
Has the information i supplied relevant to your problem.
I can really go in depth to get you going but i would need the pictures I requested yesterday.
Regards
Les

Hi Les here
Have you had any progress with the info that i sent, it seems a little generic but i am willing to go further with the assistance with the repair with the data requested.

Hi Les here,

Have you managed to solve your issue or is it still a problem.

Regards

Les