How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Les Wilkinson Your Own Question
Les Wilkinson
Les Wilkinson,
Category: Heavy Equipment
Satisfied Customers: 16
Experience:  Expert
114806441
Type Your Heavy Equipment Question Here...
Les Wilkinson is online now

Looking for number of pivot bearing off steering ram on 2008

This answer was rated:

Looking for number of pivot bearing off steering ram on 2008 4070cv 100 weidemann please
JA: What is the complete model and serial number of your machine?
Customer: Don't av serial number at d min, model 4070 cv 100
JA: Are you fixing this yourself? What have you tried so far?
Customer: Yes fixing myself, just need to buy pivot bearing
JA: Is there anything else the Equipment Mechanic should know before I connect you? Rest assured that they'll be able to help you.
Customer: No thanks
Hi Les here
Do you perhaps have a picture of the pivot you require.
I can get the part number and availability, what is your location i will also look for OEM alternative and a nearest supplier, will this help you.
Regards
Les
Customer: replied 5 months ago.
File attached (TZ4M5G6)
Customer: replied 5 months ago.
File attached (3LS4SGT)
Hi ,
The bearing is basically a bog standard rose bearing, you can get that at any bearing supplier if you have any part of the bearing with the part no,
The bearing pic you sent has a number on it however if ebay is true to form it could just be a generic picture for ad purposes.
The eye of the ram is not in the best of conditions, it the eye screwed on or welded on??
Regards
Kes
Customer: replied 5 months ago.
Eye ie welded on,.need replacing also don't have number for pivot bearing coz completely in bits
Hi
Ok bear with me for the morning, let me see what i can come up with for you.
Regards
Les
Customer: replied 5 months ago.
Ok thanks, ***** ***** able to get replacement rod with eye but just need bearing number if possible
Hi Will do, i will be in touch later.
Regards
Les
Hi les here,
I was having difficulty getting the info i need today, can we resolve in the morning.
Regards
Les
Hi Les here
I have found all the relevant info regarding your steering ram issue.
This system apparently according to the OEM only has a bearing on the cylinder side of the steering ran.
The rod side is just a machine sliding fit with no bush or bearing at all, this is not an uncommon practice and has been used in construction machinery for many years.
I have attached a screenshot of the parts book page for you to review.
As no serial number was avaliable we worked on the model and year only.
I have also attached the part number for the rose bearing (no28) and you will see exactly what i mean.
Please let me know if this helps.
Regards
Les
Part no sheet
Regards
Hi Les here
Is this information what you require.
Regards
Les
Customer: replied 5 months ago.
That's helps , serial number of machine is NL 38847*U006215R
Hi les here,
Has this information solved your problem, can i offer any further assistance.
Regards
Les
Customer: replied 5 months ago.
all good Les thanks, ***** ***** where I can purchase parts book for future reference.
Hi,
These guys were very helpful,i think if you give them all your details you may get the book for free.
Please contact me if you need more help.
Please rate my service.
Thanks again
Les
Good luck
Les Wilkinson and other Heavy Equipment Specialists are ready to help you