How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MasterFixIt Your Own Question
MasterFixIt, Handyman
Category: HVAC
Satisfied Customers: 9568
Experience:  Handyman
Type Your HVAC Question Here...
MasterFixIt is online now

Hi, i have a master space heater that as 2 ignition coils.There

This answer was rated:

Hi, i have a master space heater that as blown 2 ignition coils.There is no pcb on the heater but a small ( relay or transformer ).The information on the heater is 230V.A.C ,phase 1 , AMPS 2 ,LINE FUSING 15 AMPS , hope this helps regards Paul.



ps it is attatched by spade connectors

Hello and welcome to Just Answer/ Pearl.
I am Tech Michael and I will be assisting you today.
Please be patient as these are technical issues and we need information in order to be able to
help you solve your difficulties. The more information you give us the quicker we can help.
Can you find the model#? I would need that.
Thank you
Tech Michael
Customer: replied 3 years ago.

Model B100ekd

Thanks Paul,
So do you need replacement coils?
Or troubleshooting advice. Thanks
Tech Mike
Customer: replied 3 years ago.

Trouble shooting advice, what is the part called that controls the deed to the coil ?

Hi thanks Paul,
do you get any power to the unit any sign of life?
Thank you
Tech Mike
Customer: replied 3 years ago.

Yes power still there now, motor turns but ignition coil blown again

what happens when you replace the coil, does it work at all even a little?
thank you
Tech Michael
Customer: replied 3 years ago.

Spark plug lights then I hear a pop sound from the coil, to me the coil is not getting regulated with the amount of juice it is getting

Customer: replied 3 years ago.

Hi just spoke to a friend and he told me I had wrong type of coil in heater the one I was using was off a motorbike

Lol! it happens,
i will stick with you anyway at no additional cost you until you are sure we have this all worked out but since this may take some time, if you will rate my service in a positive fashion thus far before you close this page, the system will allow me to schedule free follow ups with you and also ensure your question will NOT close or time out;-)
You will then be able to contact me at anytime at no additional cost until we have this fixed for you.

Thank you *****
MasterFixIt and other HVAC Specialists are ready to help you
Customer: replied 3 years ago.

Where will I get a coil from cheapest lol

Hi please check with me on that in the morning, the site i use for that is down for repair for the day sorry and thank you so much for your patience!
Tech Michael
Customer: replied 3 years ago.

Ok see you tomorrow bye

Have a good night !
tech Michael
Customer: replied 3 years ago.

Hi Michael do you have the website for cheaper coils ?also will i be able to buy the part that supplies the coil ?thanks Paul.

Hi Paul,
I checked here from the US for you but nothing comes up.
You will need to locate them from a local supplier if you can. I will keep checking on this for you.
Tech Michael
Customer: replied 3 years ago.

i have found one that does boilers called Jatindera Boiler co on the net,please take a look for me thanks

Hi Paul,
I looked at it and think it should do the trick for you;-)
Tech Michael
Customer: replied 3 years ago.

Hi Mike,did you find out what the thing that powers the ignition is called ?

Hi , that part is called a transformer ;-)
Customer: replied 3 years ago.

Hi Mike i will call in to town over the weekend and let you know what i can get hold of,have a great weekend,Paul.

Hi Paul have a great weekend too!
Will let you know what I find as well.
Tech Mike
Customer: replied 3 years ago.

Hi Mike,went into town this morning and the shop assistant said it is a motor start relay i require,which sounds about right,i know the power in is 230V but what amps out do i require ? thanks Paul.

Hi Paul 15 amp should be fine for this;-)
Customer: replied 3 years ago.

Hi Mike,i bought the motor start relay but having difficulty locating a 230V ac HT ignition coil ,any ideas ? thanks Paul.

Hi Paul I can check on that for you but that will be Monday.
Customer: replied 3 years ago.

ok speak to you monday ,paul.

Hi Im not sue but looked like you tried to ask me something?
Customer: replied 3 years ago.

Hi Mike,i might have got a ignition coil off the internet,just awaiting an email regarding the part/s,will keep you informed,regards Paul.

ok sounds good
Customer: replied 3 years ago.

Hi Mike I managed to get hold of an igniter off a oil burner so just awaiting its arival I will let you know if I am up and running when parts arrive takecare paul :)

Sounds good Paul:-)
Customer: replied 3 years ago.

Hi Mike,pit the new parts on,motor running at about half speed and no spark to plug ?any ideas,this is doing my fecking head in aarrgghhh :(

Hi is there a capacitor on that?
It sounds like you need one there.