How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • Go back-and-forth until satisfied
    Rate the answer you receive.
Ask Tim Cooke Your Own Question
Tim Cooke
Tim Cooke,
Category: HVAC
Satisfied Customers: 1055
Experience:  Owner at Self-employed
Type Your HVAC Question Here...
Tim Cooke is online now

Assistant: How can I help? I have just bought a replacement

Customer Question

Assistant: Hi. How can I help?
Customer: hi, I have just bought a replacement DT90E and trying to bind I get to the Inst section but when pressing the down button to move to next section noting happens. I can move upwards but not downwards from the Inst display
Assistant: I'll do all I can to help. How long have you been dealing with this?
Customer: just for a couple of hours
Assistant: Do you plan on doing the work yourself?
Customer: Yes, I thought it was an easy swap over from my previous faulty thermometer
Assistant: Anything else we should know to help you best?
Customer: not really
Submitted: 7 months ago.
Category: HVAC
Expert:  Tim Cooke replied 7 months ago.
Hello, when you see “Inst” the thermostat is in Installer Mode. To exit Installer Mode, press and hold the off/standby button for 3
seconds.You mentioned that you’re trying to bind the thermostat. It isn’t possible to do that because this isn’t a wireless thermostat.
Expert:  Tim Cooke replied 7 months ago.

Hello, how did you get on with your thermostat?
If my advice was useful to you, please rate it when you get a moment :-)