2004 jeep grand cherokee 2.7 diesel after driving for

Hello

This could be a wiring issue as things tend to expand when hot and its possible a poor or partial electrical connection is being pushed apart on one of the major sensors so check the connection plug and wiring to the following;
Airflow meter
Crank position sensor
Cam position sensor
O2 sensor
Throttle position sensor

unplug each in turn and use some switch / contact cleaner spray on the pins to ensure its all grease / dirt free

Also worth checking the connections to the fuel pump for the same reason - unplug each in turn and give them a good squirt of switch / contact cleaner - Not WD40

and also unplug and inspect the main power relays and fuses for signs of overheating or corroded terminals - so the ones for the ECU and the fuel pump

And also unplug the wiring loom connections in the engine bay one at time and inspect for corroded or recessed pins.

Hi
do you still need help?
Bear in mind that the site takes a deposit from you at the beginning and this is held by the site until you rate my answer at which point the cash is split between the site and the expert. I am only paid for my work on this question if you rate my answer, using the star system at the top of the screen. Please do not forget! If you're not pleased, also let me know because rating bad does not result in a refund, there are better options. Rating now will not close this post nor prevent further replies
Thanks Matt