How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty, ASE Certified Technician
Category: Mercedes
Satisfied Customers: 56560
Experience:  Bosch Certified Master Technician with over 35 years experience in the automotive industry.
Type Your Mercedes Question Here...
Marty is online now

I recently exchanged drivers seatbelt,after finishing the

This answer was rated:

I recently exchanged drivers seatbelt,after finishing the job i found that the srs light was stuck on.
Hi, my name is***** this problem you will need to get the car connected to a Mercedes diagnostic tester in order to erase any fault codes stored in he SRS control module. Once the codes are erased the light will turn off. More than likely a code was inadvertently set while exchanging the seatbelt. You should double check your connections to be sure they are plugged in correctly.
Marty and other Mercedes Specialists are ready to help you