How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy R Your Own Question
Jeremy R
Jeremy R, Technician
Category: Motorcycle
Satisfied Customers: 2
Experience:  20+ years experience. Factory trained and certified
Type Your Motorcycle Question Here...
Jeremy R is online now

yamahA TTR600RE 2004 Hard to start when cold .when it warm

Customer Question

yamahA TTR600RE 2004 Hard to start when cold .when it warm it runs for a bit than cuts out with a back lash
Submitted: 3 years ago.
Category: Motorcycle
Expert:  Shantal-Mod replied 3 years ago.

I'm Shantal and I'm a moderator for this topic.

We have been working with the Experts to try to help you with your question. Sometimes it may take a bit of time to find the right fit.

I was checking to see if you had already found your answer or if you still need assistance from one of the Experts.

Please let me know if you wish to continue waiting or if you would like for us to close your question?

Thank you,

Customer: replied 3 years ago.

when bike is started and let to warm up choke is off and left to idol bike will cut out

carb looks clean,

bike ok on a run

,new spark plug

but if i come to stop at a junction i have to keep the revs up or it feals it will cut out

Expert:  Shantal-Mod replied 3 years ago.

Thank you for getting back to me. We will continue to look for a Professional to assist you.

Thank you for your patience,

Expert:  Doug E replied 3 years ago.

When did this problem first start happening? Does the bike have any mods? How many miles are on the bike? Do you know what the service history on the bike is?

Customer: replied 3 years ago.

just had bike so fault came with it .

It was taken to spain for two years and just cume back .

Ive just ajusted pilot mixture screw think it was a weak mix

lt seams to be running ok ?

Expert:  Doug E replied 3 years ago.
OK, great. If you do need help in the future, let me know.