How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Trainer/ Master Technician
Category: Peugeot
Satisfied Customers: 3498
Experience:  Trainer 8+ years, master tech. 10+ years, SAE member
Type Your Peugeot Question Here...
Billy is online now

strip dashboard to replace new heater matrix

Customer Question

strip dashboard to replace new heater matrix qw
Submitted: 4 years ago.
Category: Peugeot
Expert:  Shantal-Mod replied 4 years ago.


I've been working hard to find a Professional to assist you with your question, but sometimes finding the right Professional can take a little longer than expected.

I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you.

Thank you,


Customer: replied 4 years ago.

if you continue with search for an answer.


Thank you


Barry Hughes

Expert:  Shantal-Mod replied 4 years ago.

Hello Barry,

Thank you for getting back to me. We will continue to look for a Professional to assist you.

Thank you for your patience,


Expert:  Billy replied 4 years ago.
Hello Barry and welcome! I'm Billy and i will assist you with this.

My apologies for the delay, thank you for your patience.

This is a major task. The battery cables must be disconnected for 15 minutes prior to starting this, to neutralize the airbag system, as some airbags will require rempving.
On the outside, you will need to drain the coolant, and remove the two hoses and fittings that connect to the heater matrix from engine bay. If equiped with A/C, you will need to evacuate the freon from engine bay, and disconnect the fittings as well.
On the inside, use a plastic wedge, and if not available use a flat head screwdriver, and wrap some tape around the head, to avoid scratching the plastics.
And as for the dashboard or fascia:
click here for details