How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg, Technician
Category: Peugeot
Satisfied Customers: 7283
Experience:  Automotive diagnostic tech
Type Your Peugeot Question Here...
Greg is online now

peugeot 207 fault code p0341 please suggest what to do

Customer Question

peugeot 207 fault code p0341

please suggest what to do
Submitted: 3 years ago.
Category: Peugeot
Expert:  Greg replied 3 years ago.
Hi .

This P0341 code the powertrain control module (PCM) encountered a problem with the camshaft signal.

Possible causes of code P0341

This may mean that one of the following has happened:

Cam sensor wiring routed too close to spark plug wiring (causing interference).
Poor wiring connection at cam sensor.
Poor wiring connection at PCM.
Bad cam sensor.
Damaged reluctor wheel.

Often replacing the sensor fixes this code, but not necessarily.

It's important to check the following:

Check that the wiring isn't routed too close to any secondary ignition components (coil, spark plug wires, etc.)
Visually inspect the wiring at the sensor for any burn marks, discoloration indicative of melting or .
Visually inspect the cam sensor for damage.
Check the connection on the sensor for damaged pins, wiring contact .

Need further assistance then please get back to me .

My goal is to provide you with excellent service – if you feel you have gotten anything less, please reply back with the reply box below and not the poor or bad service button ,
For further assistance there is no extra charge after accepting.

Rgds Greg