How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian, Plumber
Category: Plumbing
Satisfied Customers: 866
Experience:  16 yrs. experience as plumber, including full bathroom and kitchen installations.
Type Your Plumbing Question Here...
Brian is online now

I just installed a Kenmore powermiser 9 hwt.. I am not getting

Customer Question

I just installed a Kenmore powermiser 9 hwt.. I am not getting hot water. I have check the top terminals and am getting no voltage reading (should get 240)
I am using 40 amp 8-3 gauge connection that worked with tankless unit before with no issues. I tried two different breakers with same results.
I confirmed connections and reset button is stiff but no clicking and it is not tripping the connection.. any ideas.
Submitted: 4 years ago.
Category: Plumbing
Expert:  Brian replied 4 years ago.

emianplumbing :

Hi My name is Brian, I am sorry you have not had any replies, I think this maybe due to posting your question on the UK area of Just Answer. If this was a mistake on your or our part please let the moderators know, they will either repost it or cancel your question for you. Best regards

emianplumbing :