How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Plumber
Category: Plumbing
Satisfied Customers: 3768
Experience:  City and Guilds qualified plumber
Type Your Plumbing Question Here...
Andrew Smith is online now

I would like to connect my underfloor heating system to my

Customer Question

I would like to connect my underfloor heating system to my vokera ch boiler its the electric side of it, the plumping side is ok and working when the UDF heating wants hot water a want it to switch the boiler on we do it manual just now
Submitted: 4 years ago.
Category: Plumbing
Expert:  Andrew Smith replied 4 years ago.

Andrew Smith :

If you put a 2 port valve on the heating about 2 foot below the boiler, then tee off above it and then put a motorised valve on that branch

Andrew Smith :

Let the room stat control the 22mm main supply and let the underfloor stat control the teed in circuit and fee the floor circuit from that

Andrew Smith :

Wire it as an S plan

JACUSTOMER-p30uv5fy- :

a need to talk to you about my setup I understand what you mean in your answer

Andrew Smith :

I am back on now