How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Plumber
Category: Plumbing
Satisfied Customers: 760
Experience:  Residential journeyman plumber, over 20 years experience.
Type Your Plumbing Question Here...
Jerry is online now

Ive got a problem with a bath mixer tap valve. its 3/4 inch

Customer Question

I've got a problem with a bath mixer tap valve. it's 3/4 inch gauge but with a 1 inch thread to fix to the metal base. do you supply these or know where I can get one. I have a replacement 3/4 inch valve but it's too small for the 1 inch diameter in the base of the metal mixer tap
Submitted: 4 years ago.
Category: Plumbing
Expert:  Andrew Smith replied 4 years ago.
Is the problem the bath tap hole in the bath is not covered by the tap?