How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Plumberpro Your Own Question
Plumberpro, Plumber
Category: Plumbing
Satisfied Customers: 634
Experience:  Heating and plumbing answers. 20 years experience
Type Your Plumbing Question Here...
Plumberpro is online now

Trying to fit a thermostatic ßhower bath mixer and hot water

This answer was rated:

Trying to fit a thermostatic ßhower bath mixer and hot water working but no cold water. Help please
Dhi first check your hot and colds are the right way. Should be hot on a he left as you look at it . if this is OK . then you probably have an air lock if you have a tank fed system ( cold water storage tank in the loft )
If you turned a valve off to turn off the cold water chec k it didn't snap and is still in the closed position.. If you have tried all these then you most likely have an air lock
Plumberpro and other Plumbing Specialists are ready to help you