How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask VanMagnus Systems Your Own Question
VanMagnus Systems
VanMagnus Systems, Engineer
Category: Printers
Satisfied Customers: 1158
Experience:  I have more than 20 years of experience in the Printer Hardware and Software support. A+ certified.
Type Your Printers Question Here...
VanMagnus Systems is online now

I have a PIXMA iP90 mobile prinetr Se no FCWB02348 It doesnt

Customer Question

I have a PIXMA iP90 mobile prinetr Se no FCWB02348
It doesn't feed paper although all other function seem to work according to sounds and movement of cartridge holder
What is the probelm
Submitted: 3 years ago.
Category: Printers
Expert:  VanMagnus Systems replied 3 years ago.
VanMagnus Systems :

Please follow the instructions below:

VanMagnus Systems :

Clean The Paper Feed Rollers.
Instructions how to clean the paper feed rollers.

If the paper feed rollers become dirty, they may not be able to properly feed paper due to the feed roller's slippage.

If paper does not feed correctly, perform the following to clean the paper feed rollers:

Confirm that the printer is powered on.

Remove any paper from the printer.

Press and hold the <Resume/Cancel> button.

Release the <Resume/Cancel> button after the Power lamp blinks three times.

Note: The Power lamp will blink and the paper feed roller starts cleaning itself by revolving.

When the Power lamp lights in green, repeat Steps 3 and 4 up to two additional times. (Please wait approx. 30 seconds for paper feed roller cleaning to complete.)

To confirm whether cleaning has been performed properly, set a blank sheet of plain paper (8 1/2 x 11 Letter size) in the sheet feeder or cassette.

Press and hold the <Resume/Cancel> button and release it when the Power lamp blinks three times. (The paper set in the printer is picked up and fed.)

Repeat the process as necessary.

VanMagnus Systems :

Chime in if more assistance is needed.....