How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1, Small Engine Technician
Category: Small Engine
Satisfied Customers: 2654
Experience:  Journeyman TechnicianWorked on small to large engines for 30 yearsGas,LP,Diesel
Type Your Small Engine Question Here...
spankyjr1 is online now

How do you fit a kubota tractor wheel bush into the wheel,

This answer was rated:

How do you fit a kubota tractor cutting deck wheel bush into the wheel, part number 70722-44190, the wheel and bush appear too tight to fit?

This is fitting for two bushes to the cutting deck front wheel for a

RC60-35STR cutting deck.

Hi, my name is ***** *****'re having trouble today.I will do my best to assist you in resolving your issue.

The bushing is a press fit and usually we install them with a press.

What you can do is put bushings in freezer overnight to shrink them,,then use a block of wood over bushing and pound in,,,,be careful not to damge bushing,, have the shaft inside the bushing to keep it from getting damaged.

If you have bushing drivers to drive in bushings even better.

Any questions or problems let me know I'm happy to assit.

Customer: replied 2 years ago.

Hi thanks for info, one side of the bush is bevelled is this the side to place into the wheel?

Do you mean tappered like a rounded edge?

That side would go in first just to get it started.

spankyjr1 and other Small Engine Specialists are ready to help you
Thank you for the excellent rating Trevor very much appreciated.