How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 30095
Experience:  Service manager and technician for all brands of engines with 40 + years of experience.
Type Your Small Engine Question Here...
Curtis B. is online now

I want to install a new primer pump on a 4stroke mantis

This answer was rated:

I want to install a new primer pump on a 4stroke mantis tiller I can see what I where I need to remover 4 screws but to get at them I think I need to remove the fuel tank how do I do that?

Remove the air cleaner cover and expose the carburetor, take pictures or make a diagram of the fuel lines and the linkage, then remove the two screws holding the carburetor.
Primer is on the carburetor. Leave fuel tank alone!
Curtis B. and other Small Engine Specialists are ready to help you
Customer: replied 2 years ago.

have not finished job yet!!! part fell out and have not worked out where it csme from. will complete when i have won

OK, thanks.