TV Repair Questions? Ask a TV Technician for Answers ASAP
Yes - the blue Standby light comes on. No sound.
The blue light indicates Standby Mode - according to the Humax user's manual. I've pressed Menu button (on Humax remote) with blue light on, and blue light off: no menu comes up.
I am assuming you have rebooted the set by unplugging the set from wallpower waiting 5 mins then replugging back in again?OK so you can get the set out of this standby mode by pressing the remote control and then ON mode is no light?sorry but many sets have different methods of indicating standby or ON and it is importantAnd I am assuming no sound for either mode, if thats the case then its likely the mainboard is bad, after a few meter checks to confirm that the board would need to be ordered and fitted these smaller sets however in many instances dont warrant this because they are cheap enough to replace.I am sorry this is not something easier, if you wish to pursue a do-it-yourself repair I am available to help I am not sure though on availibility of boards for this set as Humax is not easy for partsLet me knowAnthony