How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert, Vauxhall Technician
Category: Vauxhall
Satisfied Customers: 4716
Experience:  Fully qualified 19+yrs exp/self employed technician in the UK
Type Your Vauxhall Question Here...
Robert is online now

what does a spanner over a car mean ihave changed oil air diesel

Customer Question

what does a spanner over a car mean ihave changed oil air diesel fielters
Submitted: 4 years ago.
Category: Vauxhall
Expert:  Robert replied 4 years ago.


Hopefully i can help..


There are two sorts of eml "engine management light" warnings on Vauxhalls the one with car/ with horizontal spanner through the centre is an engine electronics fault or your immobiliser has developed a problem.and isn't actually a service light - as service light comes up as InSP - the engine block warning light is usually mostly an emissions fault - If at anytime point the warning light does appear when the engines is running - then it will mean your cars ECU has actually picked up on the fault - the light in question can pretty much cover quite a wide area of possible faults from intake system / exhaust gas recycling system / ignition system to emissions control monitoring etc etc - and in all cases such as i asume without any noticable issues as far as your aware yet ,performance wise etc - then the only best way in those circumstances to track the fault down properly is to the procedure as highlighted above or have your car hooked upto a suitable diagnostic machine/code reader to retrive the fault code(s) and or at least locate exactly where the fault is and i'm sure any good garage will be able to do that for you - If you can maybe have careful look around the engine bay and check to make sure nothing electrical / plug wise has become loose damaged or any vaccum lines have come adrift etc or if you had any very recent work carried out on the car then it would be worth having the garage in question to re-check nothing has been knocked or not fitted back properly..though if you can't see anything then the next step is the test im afraid and see what your ecu has picked up on and take it from there....I do hope this helps